Flared Elbows | K.L. Jack

A flared tube fitting is a small piece of tubing used to make pipe connections. The flared end of the tube has a larger diameter than the smaller end, which is called the ID (Internal Diameter). The purpose of the flared end is to seal against the pipe that it has been inserted into. Flared Tube Fittings are easy to put together and take apart, and fit snugly together.

45° Elbows

90° Elbows

Item Type

Inventory On Hand (UOM = Each)

Classification

Fitting Type

Operating PSI

Tube Size

Brass 90° Elbow SAE 45° Flare 5/16" Tube x 3/8" MPT

90° Elbow Inverted Flare 3/8" Tube x 1/4" Male Pipe Thread

45° Elbow Inverted Flare 3/16" Tube x 1/8" Male Pipe Thread

Brass 90° Extruded Elbow SAE 45° Flare 3/8" Tube x 3/8" MPT

Brass 45° Elbow SAE 45° Flare 3/8" Tube x 1/4" MPT

45° Elbow Inverted Flare 1/2" Tube x 3/8" Male Pipe Thread

90° Elbow Inverted Flare 5/8" Tube x 1/2" Male Pipe Thread

Brass 90° Elbow SAE 45° Flare 3/8" Tube x 1/8" MPT

90° Elbow Inverted Flare 3/8" Tube x 1/8" Male Pipe Thread

Brass Elbow Inverted Flare 1/4" Tube x 1/8" Male Pipe Thread

Brass 90° Elbow SAE 45° Flare 1/4" Tube x 1/4" MPT

Brass 90° Extruded Elbow SAE 45° Flare 3/8" Tube x 1/8" MPT

45° Elbow Inverted Flare 3/8" Tube x 1/4" Male Pipe Thread

90° Elbow Inverted Flare 1/8" Tube x 1/8" Male Pipe Thread

Brass 45° Elbow SAE 45° Flare 1/2" Tube x 1/2" MPT

Brass 90° Extruded Elbow SAE 45° Flare 1/4" Tube x 1/4" MPT

Brass 90° Elbow SAE 45° Flare 1/2" Tube x 3/8" MPT

Brass 90° Extruded Elbow SAE 45° Flare 3/8" Tube x 1/4" MPT

Brass Elbow Inverted Flare 3/16" Tube x 1/8" Male Pipe Thread

90° Elbow Inverted Flare 1/4" Tube x 1/4" Male Pipe Thread

Brass 90° Elbow SAE 45° Flare 1/2" Tube x 1/2" MPT

Brass 90° Elbow SAE 45° Flare 5/8" Tube x 1/2" MPT

Brass 45° Elbow SAE 45° Flare 5/16" Tube x 1/8" MPT

Brass 90° Elbow SAE 45° Flare 3/8" Tube x 1/2" MPT