Flared Tube Fitting

skip to Main Navigation
skip to Main Content
skip to Footer

A flared tube fitting is a small piece of tubing used to make pipe connections. The flared end of the tube has a larger diameter than the smaller end, which is called the ID (Internal Diameter). The purpose of the flared end is to seal against the pipe that it has been inserted into. Flared Tube Fittings are easy to put together and take apart, and fit snugly together.

Connectors

Elbows

Flare Nuts

Tees

Union Couplings

Item Type

Inventory On Hand (UOM = Each)

Classification

End Type

Fitting Type

Operating PSI

Tube Size

Brass 90° Extruded Elbow SAE 45° Flare 3/8" Tube x 1/4" MPT

Brass SAE 45° Flare Connector 5/16" Tube x 1/8" MPT

Brass Female SAE 45° Flare Connector 3/8 Tube x 3/8 FPT

Brass 90° Elbow SAE 45° Flare 5/16" Tube x 3/8" MPT

Brass SAE 45° Flare Connector 3/8" Tube x 1/8" MPT

Brass SAE 45° Flare Tee 1/4" Tube Ends x 1/8" MPT

Brass Nut Inverted Flare 3/16"

90° Elbow Inverted Flare 3/8" Tube x 1/4" Male Pipe Thread

Brass Flare Connector Inverted 3/8" Tube x 1/8" Male Pipe Thread

Long Flare Nut Forged Brass 3/8"

Brass SAE 45° Flare Connector 1/8" Tube x 1/8" MPT

Brass SAE 45° Flare Tee 3/16" Tube Ends x 1/8" MPT

Brass SAE 45° Flare Connector 1/2" Tube x 3/8" MPT

Brass Flare Connector Inverted 3/8" Tube x 1/4" Male Pipe Thread

Brass SAE 45° Flare Connector 1/4" Tube x 1/4" MPT

Brass Flare Connector Inverted 1/2" Tube x 3/8" Male Pipe Thread

Brass SAE 45° Flare Tee 1/4" Tube

Brass SAE 45° Flare Tee 3/8" Tube

45° Elbow Inverted Flare 3/16" Tube x 1/8" Male Pipe Thread

Brass Long SAE 45° Flare Nut Milled 5/8" Tube

Brass 90° Extruded Elbow SAE 45° Flare 3/8" Tube x 3/8" MPT

Brass Nut Inverted Flare 3/8"

Brass 45° Elbow SAE 45° Flare 3/8" Tube x 1/4" MPT

45° Elbow Inverted Flare 1/2" Tube x 3/8" Male Pipe Thread