Viking #50150 Hi-Carbon Master Metric Tap & Hex Die Set (37 Piece)

Viking 50150 37-piece Premium Hi-Carbon Steel Metric Plug Tap and Hex Die Set. An extensive metric thread tap & die set that is an ideal accessory to any shop. The Viking 50150 set features Plug style taps, the most versatile tap style, and Hexagonal Dies that are ideal for chasing and repairing rusty or damaged screw threads. This set covers 16 common automotive metric thread pitch screw threads in a range from 3mm x 0.50 thru 12mm x 1.75. It also features a Tap and Hex Die for 1/8"-27 NPT Pipe Threads, a common pipe thread size used for a variety of automotive and equipment maintenance fittings.

Manufacturer Stock # HMM37PC

• Type 724 Professional Quality
• Made of high carbon tool steel
• Sharp, clean cutting edges, hardened, and tempered to cut smooth threads
• Sets are available in round and hexagon styles
• Sets are packed in plastic cases
• Pilot drills for taps sold separately

• T-Handle Small Tap Wrench for 2mm - 6mm Taps
• T-Handle Large Tap Wrench for 6mm -12mm Taps
• Hex Die Stock
• 3mm x 0.50 Plug Tap
• 3mm x 0.60 Plug Tap
• 4mm x 0.70 Plug Tap
• 4mm x 0.75 Plug Tap
• 5mm x 0.80 Plug Tap
• 5mm x 0.90 Plug Tap
• 6mm x 1.00 Plug Tap
• 7mm x 1.00 Plug Tap
• 8mm x 1.25 Plug Tap
• 9mm x 1.00 Plug Tap
• 9mm x 1.25 Plug Tap
• 10mm x 1.25 Plug Tap
• 10mm x 1.50 Plug Tap
• 11mm x 1.50 Plug Tap
• 12mm x 1.50 Plug Tap
• 12mm x 1.75 Plug Tap
• 1/8"-27 NPT Pipe Plug Tap
• 3mm x 0.50 Hex Die
• 3mm x 0.60 Hex Die
• 4mm x 0.70 Hex Die
• 4mm x 0.75 Hex Die
• 5mm x 0.80 Hex Die
• 5mm x 0.90 Hex Die
• 6mm x 1.00 Hex Die
• 7mm x 1.00 Hex Die
• 8mm x 1.25 Hex Die
• 9mm x 1.00 Hex Die
• 9mm x 1.25 Hex Die
• 10mm x 1.25 Hex Die
• 10mm x 1.50 Hex Die
• 11mm x 1.50 Hex Die
• 12mm x 1.50 Hex Die
• 12mm x 1.75 Hex Die
• 1/8"-27 NPT Pipe Hex Die
• Sturdy, Impact-Resistant Plastic Case

For best results with any cutting tool always use a cutting fluid or lubricant whenever possible. Always clamp or secure in place the item being drilled, unsecured small or light parts can spin violently while being drilled, causing injury. Always wear ANSI/CSA approved protective eyewear when using any tool.