Ramset SP100 PowerPoint 1" Step Shank Pin - 100 per Box

Ramset PowerPoint Premium .300 Head Step Shank Powder Actuated Drive Pins for Heavy Duty Concrete and Structural Steel. Designed for use in Low Velocity Powder Actuated Tools sized for .300 Head Pins. Ramset PowerPoint Drive Pins will penetrate dense concrete and steel more easily and reliably than standard pins. PowerPoint Pins are manufactured from ductile high strength carbon steel and feature a mechanical zinc finish for excellent corrosion resistance. They can be used with most powder actuated tools that fire .22 cal low velocity charges as well as .27 caliber strip loads and .25 caliber disc loads. Sold 100 per box.

Installation Notes:

1. When anchoring drive pins into concrete a minimum installation depth of 1" (inch) is typically recommended. A 3/4" minimum penetration is noted on the attached Technical Data Sheet but 1" is the preferred minimum depth whenever possible.
2. To ensure a proper and secure installation when anchoring PowerPoint smooth shank drive pins into structural steel the entire pointed end of the pin should be driven completely through the back of the steel plate. Smooth shank drive pins with points not driven through the steel plate will be prone to pull-out and failure under load.
3. Refer to the attached Powder Fastener & Load Selection Guide for assistance in determining the proper Pin and Load combination to use for your application.

• Mechanical zinc finish resists corrosion
• Ideal for penetrating dense concrete and structural quality steel
• Shank diameter = .150/.180 Head diameter = .300
• 100 per box
• Powder actuated fasteners