Flared Tube Fitting

skip to Main Navigation
skip to Main Content
skip to Footer

A flared tube fitting is a small piece of tubing used to make pipe connections. The flared end of the tube has a larger diameter than the smaller end, which is called the ID (Internal Diameter). The purpose of the flared end is to seal against the pipe that it has been inserted into. Flared Tube Fittings are easy to put together and take apart, and fit snugly together.

Connectors

Elbows

Flare Nuts

Tees

Union Couplings

Item Type

Inventory On Hand (UOM = Each)

Classification

End Type

Female Thread

Fitting Type

Male Thread

Operating PSI

Thread Size

Tube Size

Brass SAE 45° Flare Male Run Tee 3/8" Tube x 1/4" MPT

Brass Long SAE 45° Flare Nut Milled 3/16" Tube

1/2" Tube Brass Male 45° Inverted Flare Nut

Brass Female SAE 45° Flare Connector 1/4" Tube x 3/8" FPT

Brass SAE 45° Flare Reducing Tee 1/4" Tube x 3/8" Tube

90° Elbow Inverted Flare 5/8" Tube x 1/2" Male Pipe Thread

Brass 90° Elbow SAE 45° Flare 3/8" Tube x 1/8" MPT

90° Elbow Inverted Flare 3/8" Tube x 1/8" Male Pipe Thread

Brass SAE 45° Flare Union Coupling 3/8" Tube

5/16" Tube Brass Male 45° Inverted Flare Nut

Brass Flare Male Connector 5/16" Tube x 1/4" Male Pipe Thread

Brass SAE 45° Flare Connector 3/4" Tube x 3/4" MPT

Brass SAE 45° Flare Connector 5/16" Tube x 1/4" MPT

Brass Elbow Inverted Flare 1/4" Tube x 1/8" Male Pipe Thread

Brass SAE 45° Flare Connector 5/8" Tube x 3/4" MPT

Brass SAE 45° Flare Connector 5/8" Tube x 1/2" MPT

Brass SAE 45° Flare Connector 1/2" Tube x 1/2" MPT

Brass Flare Tee Tube Ends 3/8" x 1/4" Female Pipe Thread

Brass Flare Male Connector 3/16" Tube x 1/8" Male Pipe Thread

Brass 90° Elbow SAE 45° Flare 1/4" Tube x 1/4" MPT

Brass 90° Extruded Elbow SAE 45° Flare 3/8" Tube x 1/8" MPT

Brass Female SAE 45° Flare Connector 1/2" Tube x 1/2" FPT

45° Elbow Inverted Flare 3/8" Tube x 1/4" Male Pipe Thread

Brass SAE 45° Flare Union Coupling 3/16" Tube