Bottom Taps | K.L. Jack

Bottom Hand Taps are designed specifically for carrying a full usable thread to the bottom of a tapped hole. Bottom taps have 1 or 2 chamfered threads and are typically used as a secondary tap after the initial threads have been created using a Taper or Plug tap. Bottom taps may be used in both blind or through hole tapping. For a complete thread to the bottom of a blind hole a Bottom tap will be required.

Inch

Metric

Inventory On Hand (UOM = Each)

System of Measurement

Diameter

Thread Type

Number of Flutes

Screw Diameter

Tap Drill Size

Tap Type

Package Quantity

Thread Pitch

Threads Per Inch

#8-36 UNF Bottom Tap, 4 Flute, H2, Bright Finish

M24 x 3.0 Metric Bottom Tap, Coarse, 4 Flute, D8, Bright

3/4"-16 UNF Bottom Tap, 4 Flute, H3, Bright Finish

M30 x 3.5 Metric Bottom Tap, Coarse, 4 Flute, D9, Bright

1-1/2"-6 UNC Bottom Tap, 4 Flute, H4, Bright Finish

1/2"-20 UNF Bottom Tap, 4 Flute, H3, Bright Finish

M18 x 1.50 Metric Bottom Tap, Fine, 4 Flute, D6, Bright

7/8"-14 UNF Bottom Tap, 4 Flute, H4, Bright Finish

#10-24 UNC Bottom Tap, 4 Flute, H3, Bright Finish

M10 x 1.25 Metric Bottom Tap, Medium Fine, 4 Flute, D5, Bright

M8 x 1.25 Metric Bottom Tap, Coarse, 4 Flute, D5, Bright

M5 x .80 Metric Bottom Tap, Coarse, 4 Flute, D4, Bright

M7 x 1.0 Metric Bottom Tap, Coarse, 4 Flute ,D5, Bright

M6 x 1.0 Metric Bottom Tap, Coarse, 4 Flute, D5, Bright

1/4"-28 UNF Bottom Tap, 4 Flute, H3, Bright Finish

1-1/4"-12 UNF Bottom Tap, 6 Flute, H4, Bright Finish

M22 x 2.50 Metric Bottom Tap, Coarse, 4 Flute, D7, Bright

M3 x .50 Metric Bottom Tap, Coarse, 3 Flute, D3, Bright

M16 x 1.50 Metric Bottom Tap, Fine, 4 Flute, D8, Bright

#6-32 UNC Bottom Tap, 3 Flute, H3, Bright Finish

M18 x 2.50 Metric Bottom Tap, Coarse, 4 Flute, D7, Bright

3/4"-10 UNC Bottom Tap, 4 Flute, H3, Bright Finish

1"-14 UNF Bottom Tap, 4 Flute, H4, Bright Finish

M12 x 1.75 Metric Bottom Tap, Coarse, 4 Flute, D6, Bright